65 results for "Hose Repair Kits" between $2.00 and $200.00

1 each - 3/8", 1/2" brass, 3/4" nylon hose menders. 1 each - brass female GHT * 3/8" barb, 1/2" barb, 3/4" barb. 1 each- brass male GHT * 3/8" barb, 1/2" barb, 3/4" barb. 6 hose washers. 6 gear clamps for 3/8" or 1/2" hose. 4 gear clamps for 3/4" hose.

The GARDENA repair connector replaces damaged brass coupler without needing tools. The GARDENA Hose Connector allows fast and comfortable connection of the hose to the faucet. This kit includes a female threaded faucet adaptor. The Gardena faucet connector is suitable for ½" hoses. Made in Germany.

Comet 1204.0564 pump mounted regulator with adjustable pressure knob and manual dump lever fits models APS31, APS41 and APS41AP. Includes two 3/8" ball valve outlets and 3/8" hose barb bypass.

Maximum flow rate 22.1 GPM. Maximum pressure 200 psi. Maximum 800 RPM. 3/4" NPT inlet & outlet 1" hose barb included. 15/16" solid shaft. Continuous operation 100 psi. Intermittent operation 200 psi.

Comet 1204.0195 pump mounted regulator with adjustable pressure knob and manual dump lever fits models P48 and P48AP. The regulator has three 3/8" ball valve outlets and 3/4" hose barb bypass.

Comet 1204.0677 pump mounted regulator with adjustable pressure knob and manual dump lever fits models APS51, APS51GR5 and APS71GR5. This regulator includes three 1/2" ball valve outlets and 1" hose barb bypass and gauge. Direct mount adapter required.

Male and female coupling garden hose repair kit fits 1/2" dia. hose. OEM repair kit for plastic hose. Garden Hose Repair Coupling are made of brass-coloured aluminum.

Device for continuous spray cone width adjustment. Second ratchet trigger for spray pattern adjustment. Ceramic nozzle. 1.5 mm nozzle standard. Max. flow 17 gpm. Max. 700 psi. Trigger lock. Inlet:  Standard with swiveling 1/2" male NPT.  Also available with the addition of a 3/8" I.D. hose barb or a 1/2" I.D. hose barb (here I.D. refers to the inner diameter of the hose). See Long Range Tree Gun for spare nozzles.

Hypro D813 three diaphragm pump. Max. specifications: 21.4 gpm, 725 psi, 550 rpm. 1 1/2" hose barb inlet, 3/4" NPT outlet. For full pressure capability, minimum 11 HP engine, we recommend an 18 HP engine with a 1 inch keyed shaft (obviously, the more horse power, the better the performance). Many other models available. Anodized aluminum housing. Weight: 48 lbs.

4.0 gpm. 70 psi maximum. Heavy-duty, commercial quality. Internally manifolded with anodized aluminum construction. Glass filled nylon heads. Hose barb port in: 3/4". Weight: 8 lbs.

Fix-A-Chip Kit repairs chips in wood, formica, paneling, plastic and more. Kit requires no heat to repair damage.

This repair kit is what we use to rebuild the 23120 regulator by TeeJet. If your system will not come up to pressure, often the problem is that the seats or o-rings in the relief valve are worn and are allowing all your volume to return to your tank, instead of creating pressure out of your nozzle.

(Click image for a larger view) These kits include new shaft & bearings. Kit for Cont. C-85, C-90, 0-200 Engine P/N 07-00110. Kit for Cont. C-145, 0-300 Engine

[TABLE]Airpath Compass Repair Kits. Compass Deviation card holder. Deviation card are sold separately.

These kits will bring your pump back to life. If the oil in your Hypro D252 is milky grey in color, you have a torn diaphragm, stop using your pump immediately and replace your main diaphragms to avoid permanent damage to your Hypro pump.

If you notice that the oil in your pump has a milky color, it most likely means that it is time to change the diaphragms. Do not run the pump with oil that is mixed with spray. It will seriously damage your pump.

See below for the repair kit, the repair kit contains the most common wearing parts for the Green Garde JD9-C spray gun. Most of the o-ring are in the repair kit and it will fix your leaking spray gun